Part Number : C4029

28″ x 8″ Surface Mount Drip Tray With Rinser – Vibrant Gold Finish- Two Side cut-out


  • Gold

Sign In to View Price

In stock (can be backordered)

28″ x 8″ Surface Mount Drip Tray With Rinser – Vibrant Gold Finish- Two Side cut-out (C4029)

category: PVD Drip Tray Trough Beverage

Two side cut-out rinser drip tray for draft beer dispensing. Use under beer towers to capture overflows and leaks. Includes assembly to drain out waste water.

Our Rinser is NSF approved and is handy to wet the beer mug down before pouring.

Features:

  • Comes in Vibrant Gold finish.
  • Double side cut-out drip tray with Rinser.
  • This bar top drip pan has robust 16 gauge Stainless Steel construction.
  • Removable grill for easy manual cleaning.
  • Rinse with cold water before pour Wet Glass, Pours better than dry glass
  • Drip Tray Trough Beverage with rinser can be customized to various finishes on special request.

Please Note: It is recommended that you use a Pressure Limiting Valve (PLV) when connecting to a mains water line.

  Component Includes:

  • C0291/2″ BSP Connector With 3/8″ OD  X 5 Feet Hose – PP Pipe Assembly
  • C958–  Standard Drain Assembly- 3-1/2″.

For Any reference redirect to our :- Beer catalog

Specifications

MaterialStainless Steel
FinishPvd Vibrant Gold
Length28"
Width8"
Thickness16 gauge
Depth3/4"
Mounting SystemSurface Mount
Standard Packing4
ApprovalsNSF Certified (Rinser Only)
Dimensions & Measurements (PDF)
Due to slight variations in manufacturing design and the varying requirements of bench materials, it is strongly recommended to have the physical Drip Tray on hand prior to cutting into bench top surfaces. We take no responsibility for installation cut out errors and provides the sizes and dimensions as a layout guide only.

Replacement Parts

Item #Part NumberReplacement Part
13-1/2" Standard Drain Assembly C958 kromedispenseC9583-1/2″ Standard Drain AssemblySign In to View PriceAdd to Cart
21/2" BSP Connector With 3/8" OD X 5 Feet Hose - PP Pipe Assembly C029 kromedispenseC0291/2″ BSP Connector With 3/8″ OD X 5 Feet Hose – PP Pipe AssemblySign In to View PriceAdd to Cart
3Glass Rinser Subassembly for Drip Tray - Vibrant Gold Finish C4029.50 kromedispenseC4029.50Glass Rinser Subassembly for Drip Tray – Vibrant Gold Finish- NSF CertifiedSign In to View PriceAdd to Cart

Installation Instructions

Rinser Water Inlet Installation Instructions

  • Always check with local plumbing codes before Installation
  • For Use with Regular or cold water supply only, Hot water is not recommended to use with rinser
  • Install in-line water regulator set at 15 PSI from the public water supply, no more than 15 Psi
  • Install an in-line one-way check valve on water supply this will prevent pressure drop which can cause leakage
  • Install in-line shut-off for the rinser system from the water supply, this must be turned off if not in use for extended periods such as off days or night time!
  • Install a shut-off for the water supply if the line is not hard plumbed into the system.