Part Number : C2151

Flojet Beer Pump – G56


  • NSF Ceritifed

The operating pressure to the pump is used to control the flow rate. Due to the pump’s powerful hydraulic push against the beer, the system must be considerably over restricted.Beer pumps are designed for dispensing draft beer from a keg, cask or brew kettle through both long or short, vertical or horizontal line runs while maintaining the brewers recommended applied pressure on the beer

 

$ 53.56

In stock (can be backordered)

Package Quantity   12



Flojet Beer Pump G56 (C2151)

Designed for dispensing draft beer from keg, cask, or brew kettle through both long or short, vertical or horizontal line runs while maintaining the brewers
recommended applied pressure on the beer.

 

  • Beer and gas are totally separated in the G56 beer pump, drive gas never touches the product
  • Use this for Both long or short draw systems
  • Change in pumping/ Air pressure does not affect the carbonation level of the beer
  • NSF approved beer pump
  • Operating pressure 20 psi minimum – 90 psi maximum.

 

 

Pump system to dispense beer out of kegs or flasks. Use with any beer gas or even air. Simple and easy way to pour beer in pubs and breweries. High operational efficiency.

Specifications – Flojet G56

C2151 beer pump installation G56 flojet

 

  • Warning:
    – If used with Carbon di-oxide gas or nitrogen gas, be sure the pump installed area – cold room/keg space is well ventilated
    –  use the pump only with specified products
    – Do not pump flammable liquids or use where flammable vapors are present

 

  • Cost-effective: no need for mixed gases or gas blenders
  • Air compression can be used to pressurize the beer pumps
  • Capable of traversing up to 800 feet (244m) horizontally through a single line
  • The pump can be used to aid in beer line cleaning through wall mounted cleaning sockets
  • Feeds up to 3 faucets through a single line

Specifications

MaterialPlastic
Pump DesignPositive Displacement, Double Diaphragm
Power SourceCO2 Gas, Compressed Filtered Air
Flow Rate5 GPM
Weight1.93 Lbs
Standard Packing12

Warnings / Instructions

Important information – Prop. 65 for CA residents.
Proposition 65 Warning: This product contains chemicals known to the State of California to cause cancer and/or birth defects or other reproductive harm.

Installation Instructions

Installation Instructions –

Mounting and Installation

beer pump c2151

 

For mounting see Fig 1.
WARNING System Restrictions
The pressure to the keg in a pump system should always be only the pressure and
type of gas the brewer recommends to maintain the carbonation level in the keg.
The operating pressure to the pump is used to control the flow rate. Due to the
pump’s hydraulic push against the beer, the system must have an adequate counter
restriction. This can be accomplished by using a choke line or choke device.

 

CAUTION If using a FOB device, mount it slightly above and directly after
the pump.

If a FOB is not used, the pump will continue to cycle after the keg has
run dry. – See Fig 1