Part Number : C860

11″ x 6″ Glass Rinser Drip Tray Under Counter With Rinser Disk – Brushed Stainless -With Drain


Sign In to View Price

Clear

11″ x 6″ Glass Rinser Drip Tray Under Counter With Rinser Disk – Brushed Stainless -With Drain (C860)

Under counter Rinser drip tray. Rinse glassware right at the counter on this small and compact rinser drip tray.

Attached stainless steel plate with holes for undercounter mounting. Use before mixing drinks for a better pour.

All Krome rinsers are NSF certified.

Please Note: It is recommended that you use a Pressure Limiting Valve (PLV) when connecting to a mains water line.

  • 11″ x 6″ Glass Rinser with drip tray
  • Under counter rinser
  • Stainless steel construction in Brushed finish
  • Center mount sprayer model
  • Includes drain assembly

Specifications

FinishBrushed Stainless
Body MaterialStainless Steel 304
TypeWith Drain
Length11"
Width6"
Thickness16 gauge
Standard Packing6
ApprovalsNSF Certified (Rinser Only)
Dimensions & Measurements (PDF)
Due to slight variations in manufacturing design and the varying requirements of bench materials, it is strongly recommended to have the physical Drip Tray on hand prior to cutting into bench top surfaces. We take no responsibility for installation cut out errors and provides the sizes and dimensions as a layout guide only.

Warnings / Instructions

Important information – Prop. 65 for CA residents.
Proposition 65 Warning: This product contains chemicals known to the State of California to cause cancer and/or birth defects or other reproductive harm.

Replacement Parts

Item #Part NumberReplacement Part
1Glass Rinser Cap C306.06x1 kromedispenseC360.06x1Glass Rinser CapSign In to View PriceAdd to Cart
2Replacement Plastic Rinser Disk C334.04 kromedispenseC334.04Replacement Plastic Rinser DiskSign In to View PriceAdd to Cart
33-1/2" Standard Drain Assembly C958 kromedispenseC9583-1/2″ Standard Drain AssemblySign In to View PriceAdd to Cart
41/2" BSP Connector With 3/8" OD X 5 Feet Hose - PP Pipe Assembly C029 kromedispenseC0291/2″ BSP Connector With 3/8″ OD X 5 Feet Hose – PP Pipe AssemblySign In to View PriceAdd to Cart

Installation Instructions

Rinser Water Inlet Installation Instructions

  • Always check with local plumbing codes before Installation
  • For Use with Regular or cold water supply only, Hot water is not recommended to use with rinser
  • Install in-line water regulator set at 15 PSI from the public water supply, no more than 15 Psi
  • Install an in-line one-way check valve on water supply this will prevent pressure drop which can cause leakage
  • Install in-line shut-off for the rinser system from the water supply, this must be turned off if not in use for extended periods such as off days or night time!
  • Install a shut-off for the water supply if the line is not hard plumbed into the system.