Part Number : C5721

Secondary Regulator Panel Kit-1 Keg


Regulator Panel In your draft beer system, safely and effectively regulate the gas flow to the single keg

Sign In to View Price

Available on backorder



Secondary Regulator Panel Kit 1 Keg (C5721)

Get fresh chilled beer with the right amount of fizz and foam head by using the right gas pressure. While lower pressure produces flat beer and higher pressure creates foamy beer. This pre-assembled regulator panel will speed up the installation of secondary regulators for your draft beer system. A metal panel with an integrated stainless steel wall bracket that functions as a trustworthy transition between a keg jumper hose and trunkline connector. And makes installation on the wall of a walk-in cooler simple.
Additional Regulator Panel In your draft beer system, safely and effectively regulate the gas flow to the single keg.  Secondary gas regulators reduce pressure from a primary regulator or gas blender and provide this lower pressure to each individual keg. The secondary regulators’ adjustment range is 0 to 60 PSI, allowing you to quickly amount the flow of gas from the gas source to the keg.  There is an integrated pressure relief valve that releases the gas flow if the external pressure is higher than 55 PSI.

Other Option Available:

Sr.no Part Number
1 C5722
2 C5724
  • Single keg gas manifold –  secondary regulator panel kit.
  • Includes hose barbs with fittings for both beer and gas lines
  • Stainless steel inlet filter.
  • One pressure, one product.
  • Panel for wall mounting with pre-drilled holes.
  • 304 stainless steel tailpiece on 8′ of clear vinyl with a 3/8″ I.D.
  • Red vinyl gas hose with a 5/16″ I.D. length.
  • steel wall bracket made of stainless.
  • With a tamper-evident adjustment screw and bonnet, Premium Plus secondary regulator.
  • Included are two hose barbs and a pre-taped pipe plug.
  • For durability and precise machining, use die cast and forged brass.
  • High corrosion resistance stainless steel valve seat.
  • Filter inlet made of stainless steel.
  • high output flow rates with constant pressure supply.
  • By releasing at 55–65 PSI, pressure relief valves guarantee safety.

Specifications

Pressure0-60 PSI, for accurate keg pressure
Performance1 Pressure / 1 Kegs
Barb3/8" O.D. with shut-off
InstallationWall mount panel, pre-drilled holes
Red Hose8' of 5/16" I.D. Red Vinyl
Length8 Inch
Width5 Inch
Height3 Inch

Warnings / Instructions

Important information – Prop. 65 for CA residents.
Proposition 65 Warning: This product contains chemicals known to the State of California to cause cancer and/or birth defects or other reproductive harm.