Part Number : C5722

Secondary Regulator Panel Kit-2 Keg


Secondary Regulator Panel Kit-2 Keg

Sign In to View Price

Available on backorder



Secondary Regulator Panel Kit 2 Keg (C5722)

Get fresh chilled beer with the right amount of fizz and foam head by using the right gas pressure. Higher pressure gives out a foamy one while lower leads to flat beer and we are not fans of either. This regulator panel with air distributor caters to the Secondary pressure regulating network of beer gas regulators. A metal panel with an integrated stainless steel wall bracket that functions as a trustworthy transition between a keg jumper hose and trunkline connector. And makes installation on the wall of a walk-in cooler simple.

Additional Regulator Panel Kit In your draft beer system, safely and effectively regulate the gas flow to the two kegs.  Secondary gas regulators reduce pressure from a primary regulator or gas blender and provide this lower pressure to each individual keg. The secondary regulators’ adjustment range is 0 to 60 PSI, allowing you to quickly amount the flow of gas from the gas source to the keg.  There is an integrated pressure relief valve that releases the gas flow if the external pressure is higher than 55 PSI.
The output pressure at each outlet can be varied. For your convenience, it has a specific knob and gauge for each outlet. This allows simultaneous dispensing from two kegs using just one gas cylinder.

Other Options Available:

Sr.no Part Number
1 C5721
2 C5724
  • 2 keg gas manifold for breweries and pubs.
  • Manufactured using Stainless Steel.
  • Includes gas and beer lines.
  • Panel for wall mounting with pre-drilled holes.
  • 2 Pressures/2 Kegs
  • 304 stainless steel tailpiece on 8′ of clear vinyl with a 3/8″ I.D.
  • Red vinyl gas hose with a 5/16″ I.D. length.
  • steel wall bracket made of stainless.
  • With a tamper-evident adjustment screw and bonnet, Premium Plus secondary regulator.
  • Included are two hose barbs and a pre-taped pipe plug.
  • For durability and precise machining, use die cast and forged brass.
  • High corrosion resistance stainless steel valve seat.
  • Filter inlet made of stainless steel.
  • high output flow rates with constant pressure supply.
  • By releasing at 55–65 PSI, pressure relief valves guarantee safety.

 

Specifications

Pressure0-60 PSI, for accurate keg pressure
Performance2 Pressures / 2 Kegs
Barb3/8" O.D. ( Both Sides )
InstallationWall mount panel, pre-drilled holes
Red Hose8' of 5/16" I.D. Red Vinyl
Length8 Inch
Width7 Inch
Height5 Inch

Warnings / Instructions

Important information – Prop. 65 for CA residents.
Proposition 65 Warning: This product contains chemicals known to the State of California to cause cancer and/or birth defects or other reproductive harm.