Snake Tower – 2 Faucets – Chrome Plated Brass – Air Cooled

Snake Tower – 2 Faucets – Chrome Plated Brass (C534)

Designed to pour out beer right through its hood, this Snake tower is Krome’s innovation from its surroundings.
With a narrow column and a curved wide head ending in the beer faucets, this 2-tap draft beer tower uses Air-cooled beer cooling technology and comes with Chrome plated finish over Brass body.

Beer TAPS:
Beer Taps are used for controlling the release of beer. A draft beer is a beer that’s “on tap,” as opposed to bottled. Next time you’re at a bar or a restaurant that has a bar, take a look at the bar itself and you’ll see a row of labelled levers. Those are the beers the bar has on tap and they’re generally fresher than the bottled selection. In this tower, we used premium quality Taps with rich grade Plastic handles that provide a streamlined pouring.

Air- Cooled Technology:
Air-cooled technology is recommended for short runs in draft beer dispensing since this system will not be able to maintain the required beer pouring temperature over long distances.
In this setup, cold air is driven from the cooler to the beer tower which runs along-side the beer lines keeping them cool.
In this System, Cold Air maintains the desired beer line temperature from the keg to the draft beer tower’s faucet, Air Cooled draft beer towers are commonly found on Kegerators, Home and Commercial Bars or applications where the tower is close to a static or forced cold air source.

• Option of Thru Bar/ Clamp On.
• Optional with European Flow Control taps.
• All mounting hardware & gasket.
• Brass Shaft thread 1″ Drain Nipple through counter.
• Pre-fitted with 3/16” ID x 5’ long NSF approved tubing with beer nut on one end.

Specifications

Dimensions & Measurements (PDF)

Warnings / Instructions

Important information – Prop. 65 for CA residents.

Proposition 65 Warning: This product contains chemicals known to the State of California to cause cancer and/or birth defects or other reproductive harm.