15″ x 7″ Center Spray Glass Rinser Drip Tray – Brushed Stainless – With Drain (C466)
Krome 15″ Stainless Steel Surface Mount Beer Drip Tray with Rinser is suitable for bars and cafes.
In Bars, it is installed just below the Beer tower to give a beverage glass a cold water shot.
It is also installed close to the espresso coffee machine at the Cafe’s counter to rinse dirty milk pitchers.
It is a center-mount rinser with drain plates on either side. You can rinse glassware with ease and leave it inverted on the plate to drain off excess water.
You can used 15″ long Stainless Steel Surface Mount Beer Drip Tray with Rinser can be used in two ways:
To rinse used glasses
Wet and cool the glass down for a better pour.
All Krome rinser are NSF-certified.
Please Note: When connecting to a main water line, use a Pressure-Limiting Valve (PLV) with a Krome 15″ Stainless Steel Surface Mount Beer Drip Tray with Rinser.
- 15” X 7” Rinser with drip tray
- Stainless steel construction in Brushed finish
- Center sprayer mount rinser model
- Includes drain assembly
Specifications
Material | Stainless Steel 304 |
Finish | Brushed Stainless |
Length | 15" |
Width | 7" |
Thickness | 18 gauge |
Standard Packing | 5 |
Approvals | NSF Certified (Rinser Only) |
- Dimensions & Measurements (PDF)
- Due to slight variations in manufacturing design and the varying requirements of bench materials, it is strongly recommended to have the physical Drip Tray on hand prior to cutting into bench top surfaces. We take no responsibility for installation cut out errors and provides the sizes and dimensions as a layout guide only.
Warnings / Instructions
- Important information – Prop. 65 for CA residents.
- Proposition 65 Warning: This product contains chemicals known to the State of California to cause cancer and/or birth defects or other reproductive harm.