28" X 8" Surface Mount Drip Tray With Rinser - Brushed Finish - Two Side Cut-Out C4028 Kromedispense

Part Number : C4028

28″ X 8″ Surface Mount Drip Tray With Rinser – Brushed Finish – Two Side Cut-Out

28″ X 8″ Rinser Drip Tray Suitable For Krome 8 Faucet Overpass Tower.

Part NO.	Description
C4028	28″ X 8″ Surface Mount Drip Tray With Rinser – Brushed Finish – Two Side Cut-Out
C4029	28″ x 8″ Surface Mount Drip Tray With Rinser – Vibrant Gold Finish- Two Side cut-out
C4034	34″ x 8″ Surface Mount Drip Tray With Rinser – Brushed Finish – Two Side Cut-Out
C4035	34″ x 8″ Surface Mount Drip Tray With Rinser – Vibrant Gold Finish – Two Side Cut-Out
C4040	40″ x 8″ Surface Mount Drip Tray With Rinser – Brushed Finish – Two Side Cut-Out
C4041	40″ x 8″ Surface Mount Drip Tray With Rinser – Vibrant Gold Finish – Two Side Cut-Out
C4046	46″ x 8″ Surface Mount Drip Tray With Rinser – Brushed Finish – Two Side Cut-Out
C4047	46″ x 8″ Surface Mount Drip Tray With Rinser – Vibrant Gold Colour – Two Side Cut-Out
C4052	52″ x 8″ Surface Mount Drip Tray With Rinser – Brushed Finish – Two Side Cut-Out
C4053	52″ x 8″ Surface Mount Drip Tray With Rinser – Vibrant Gold Colour – Two Side Cut-Out

In stock (can be backordered)

28″ X 8″ Surface Mount Drip Tray With Rinser – Brushed Finish – Two Side Cut-Out (C4028)

Double side cut-out Surface drip tray for draft beer dispensing. Place it under the faucet to capture overflows and leaks. Comes with drain assembly for used water.

Our NSF approved side rinser is handy to cool the beer glass down before pouring as warm glasses cause more foaming.

Features:

Comes in Brushed Stainless finish.
Two side cut-out drip tray with Rinser.
This bar top drip pan has robust 16 gauge Stainless Steel construction.
Removable grill for easy manual cleaning.
Rinse with cold water before pour Wet Glass, Pours better than dry glass

Please Note: It is recommended that you use a Pressure Limiting Valve (PLV) when connecting to a mains water line.

Component Includes:

Specifications

Material	Stainless Steel
Finish	Brushed
Length	28"
Width	8"
Thickness	16 gauge
Depth	3/4"
Type	With Drain
Mounting System	Surface Mount
Approvals	NSF Certified (Rinser Only)

Dimensions & Measurements (PDF)

Replacement Parts

Item #	Part Number	Replacement Part
1	C958	3-1/2″ Standard Drain Assembly	Sign In to View Price	Add to Cart
2	C029	1/2″ BSP Connector With 3/8″ OD X 5 Feet Hose – PP Pipe Assembly	Sign In to View Price	Add to Cart
3	C4028.50	Replacement Glass Rinser for Drip Tray – Replacement- NSF Certified	Sign In to View Price	Add to Cart

Installation Instructions

Rinser Water Inlet Installation Instructions

Always check with local plumbing codes before Installation
For Use with Regular or cold water supply only, Hot water is not recommended to use with rinser
Install in-line water regulator set at 15 PSI from the public water supply, no more than 15 Psi
Install an in-line one-way check valve on water supply this will prevent pressure drop which can cause leakage
Install in-line shut-off for the rinser system from the water supply, this must be turned off if not in use for extended periods such as off days or night time!
Install a shut-off for the water supply if the line is not hard plumbed into the system.