Part Number : C4034

34″ x 8″ Surface Mount Drip Tray With Rinser – Brushed Finish – Two Side Cut-Out


  • Brushed Stainless

Sign In to View Price

In stock (can be backordered)

34″ x 8″ Surface Mount Drip Tray With Rinser – Brushed Finish – Two Side Cut-Out (C4034)

Double side cut-out Surface mounting style rinser drip tray for draft beer dispensing. Place it under the faucet to capture overflows and leaks. Our NSF approved side rinser  is handy to cool the beer mug down before pouring as warm glasses cause more foaming.

Features:

  • Stainless steel drip tray with Rinser Two side cut out brushed finish.
  • Robust 16 gauge Stainless Steel construction.
  • Finished smooth for safety and appearance with welded corners.
  • Glossy & durable construction finish.
  • Rinse with cold water before pour Wet Glass, Pours better.
  • Removable grill for easy manual cleaning.

Please Note: It is recommended that you use a Pressure Limiting Valve (PLV) when connecting to a mains water line.

Component  Includes:

  • C029  –  1/2″ BSP Connector With 3/8″ OD  X 5 Feet Hose – PP Pipe Assembly
  • C958   –   Standard Drain Assembly-3-1/2″.

Specifications

MaterialStainless Steel
FinishBrushed
Length34"
Width8"
Thickness16 gauge
Depth3/4"
Mounting SystemSurface Mount
Standard Packing5
ApprovalsNSF Certified (Rinser Only)
Dimensions & Measurements (PDF)

Replacement Parts

Item #Part NumberReplacement Part
13-1/2" Standard Drain Assembly C958 kromedispenseC9583-1/2″ Standard Drain AssemblySign In to View PriceAdd to Cart
21/2" BSP Connector With 3/8" OD X 5 Feet Hose - PP Pipe Assembly C029 kromedispenseC0291/2″ BSP Connector With 3/8″ OD X 5 Feet Hose – PP Pipe AssemblySign In to View PriceAdd to Cart
3Glass Rinser Subassembly for Drip Tray - Replacement C4028.50 kromedispenseC4028.50Replacement Glass Rinser for Drip Tray – Replacement- NSF CertifiedSign In to View PriceAdd to Cart

Installation Instructions

Rinser Water Inlet Installation Instructions

  • Always check with local plumbing codes before Installation
  • For Use with Regular or cold water supply only, Hot water is not recommended to use with rinser
  • Install in-line water regulator set at 15 PSI from the public water supply, no more than 15 Psi
  • Install an in-line one-way check valve on water supply this will prevent pressure drop which can cause leakage
  • Install in-line shut-off for the rinser system from the water supply, this must be turned off if not in use for extended periods such as off days or night time!
  • Install a shut-off for the water supply if the line is not hard plumbed into the system.