Part Number : C5714

1 Line Secondary Regulator U.S Standard Beer Pump Panel Kit with FOB

Sign In to View Price

Available on backorder

1 Line Secondary Regulator U.S Standard Beer Pump Panel Kit with FOB (C5714)

Get fresh chilled beer with the right amount of fizz and foam head by using the right gas pressure. While lower pressure produces flat beer and higher pressure creates foamy beer. Pre-assembled panel kit that is ready to use with a simple installation.

A Secondary Panel with Manifold with an integrated stainless steel wall bracket that functions as a trustworthy transition between a keg jumper hose and trunkline connector. And makes installation on the wall of a walk-in cooler simple.
Additional Secondary Panel In your draft beer system, safely and effectively regulate the gas flow to the 1 keg.  Secondary gas regulators reduce pressure from a primary regulator or gas blender and provide this lower pressure to each individual keg. The secondary regulators’ adjustment range is 0 to 60 PSI, allowing you to quickly amount the flow of gas from the gas source to the keg.  An integrated pressure relief valve that releases the gas flow if the external pressure is higher than 55 PSI.

This Secondary regulator panel includes the Flojet Beer pump, pressure gauge  to adjust to the desired pressure and more! The FOB installed gives great returns. It avoids beer wastage by shutting off beer supply immediately when your keg get empty. Cost effective and highly efficient, and this panel attaches to a single keg.

Other Options Available: Part Number
1 C5713
2 C5712
  • Manufactured Using Stainless Steel and Glass.
  • Finest FOB in the industry
  • Large beer chamber for easy viewing
  • Stainless Steel hose connections
  • 1 Pressures / 1 Kegs
  • On a single, simple-to-mount panel, there is a single gauge secondary regulator, a FOB, a beer pump, and beer and gas hoses for kegs.
  • Pre-drilled holes in a wall mount panel.
  • (1) Profit MaximizerTM in stainless steel, with vent drain line pre-plumbed.
  • one FlojetTM double diaphragm beer pump is included.
  • 8′ of clear vinyl with a 3/8″ I.D. tailpiece made of 304 stainless steel.
  • 8′ of red vinyl gas hose with a 5/16″ ID.
  • Wall bracket made of stainless steel.
  • Secondary regulator from Premium Plus with tamper-evident adjustment screw and bonnet.
  • Two hose barbs and a pre-taped pipe plug are included.
  • For durability and precise machining, brass is forged and die cast.
  • Valve seat made of stainless steel for high corrosion resistance.
  • Inlet filter made of stainless steel.
  • supply with constant pressure and high output flow rates.
  • Using a pressure relief valve that releases at 55-65 PSI.


MaterialStainless Steel
Bracket Material3/8" I.D. Stainless Steel
Performance1 Pressures / 1 Kegs
Pump TypeFlowjet
InstallationWall mount panel, pre-drilled holes
Length17 Inch
Width9.5 Inch
Height2 Inch
Dimensions & Measurements (PDF)

Warnings / Instructions

Important information – Prop. 65 for CA residents.
Proposition 65 Warning: This product contains chemicals known to the State of California to cause cancer and/or birth defects or other reproductive harm.