Part Number : C5717

4 Kegs, Secondary Panel with Manifold

Regulator Panel In your draft beer system, safely and effectively regulate the gas flow to the four kegs. Regulators, beer and air hoses for kegs, all on one easy mount panel. Stainless steel inlet filter. Pre-taped pipe plug and two hose barbs included.


Sign In to View Price

Out of stock

4 Kegs Secondary Panel with Manifold (C5717)

Get fresh chilled beer with the right amount of fizz and foam head by using the right gas pressure. While lower pressure produces flat beer and higher pressure creates foamy beer. This pre-assembled regulator panel will speed up the installation of secondary regulators for your draft beer system. A metal panel with an integrated stainless steel wall bracket that functions as a trustworthy transition between a keg jumper hose and trunkline connector. And makes installation on the wall of a walk-in cooler simple.
Additional Regulator Panel In your draft beer system, safely and effectively regulate the gas flow to the four kegs.  Secondary gas regulators reduce pressure from a primary regulator or gas blender and provide this lower pressure to each individual keg. The secondary regulators’ adjustment range is 0 to 60 PSI, allowing you to quickly amount the flow of gas from the gas source to the keg.  There is an integrated pressure relief valve that releases the gas flow if the external pressure is higher than 55 PSI.
The output pressure at each outlet can be varied. For your convenience, it has a specific knob and gauge for each outlet. This allows simultaneous dispensing from two kegs using just one gas cylinder.

Other Option Available: Part Number
1 C5703
2 C5704
  • 4 keg gas manifold for breweries and pubs.
  • Manufactured using Stainless Steel.
  • Includes gas and beer lines.
  • Has a gauge to adjust pressure across the lines.
  • 4 products at 1 pressure.
  • All of the keg hoses, a manifold, a single gauge secondary regulator, and an easy mount panel are included.
  • Pre-drilled holes in a wall mount panel.
  • 8′ of red vinyl gas hose with a 5/16″ID.
  • Wall bracket made of stainless steel.
  • Secondary regulator from Premium Plus with tamper-evident adjustment screw and bonnet.
  • Two hose barbs and a pre-taped pipe plug are included.
  • For durability and precise machining, brass is forged and die cast.
  • Valve seat made of stainless steel for high corrosion resistance.
  • A pressure relief valve that releases at 55 to 65 PSI ensures safety.


Red Hose8' of 5/16"
PVC Vinyl Hose Size7' of 1/2" X 3/4"
Performance4 Pressures / 4 Kegs
Length17 Inch
Width1.50 Inch
Height9.50 Inch
InstallationWall mount panel, pre-drilled holes

Warnings / Instructions

Important information – Prop. 65 for CA residents.
Proposition 65 Warning: This product contains chemicals known to the State of California to cause cancer and/or birth defects or other reproductive harm.