Part Number : C5704

Secondary Regulator Panel- 4 Keg

Regulator Panel In your draft beer system, safely and effectively regulate the gas flow to the four kegs

Sign In to View Price

Available on backorder

Secondary Regulator Panel 4 keg (C5704)

Get fresh chilled beer with the right amount of fizz and foam head by using the right gas pressure. While lower pressure produces flat beer and higher pressure creates foamy beer. This pre-assembled regulator panel will speed up the installation of secondary regulators for your draft beer system. A metal panel with an integrated stainless steel wall bracket that functions as a trustworthy transition between a keg jumper hose and trunkline connector. And makes installation on the wall of a walk-in cooler simple.
Additional Regulator Panel In your draft beer system, safely and effectively regulate the gas flow to the four kegs.  Secondary gas regulators reduce pressure from a primary regulator or gas blender and provide this lower pressure to each individual keg. The secondary regulators’ adjustment range is 0 to 60 PSI, allowing you to quickly amount the flow of gas from the gas source to the keg.  There is an integrated pressure relief valve that releases the gas flow if the external pressure is higher than 55 PSI.
The output pressure at each outlet can be varied. For your convenience, it has a specific knob and gauge for each outlet. This allows simultaneous dispensing from four kegs using just one gas cylinder.

Other Option Available: Part Number
1 C5717
2 C5704
  • Stainless steel 3/8″ I.D. wall brackets
  • 4 keg gas manifold for breweries and pubs.
  • Manufactured is Stainless Steel.
  • Has a gauge to adjust pressure across each line.
  • 4 pressures and 4 outputs.
  • For ease of installation, a metal panel with four gauge secondary regulator is mounted.\Pre-drilled holes in a wall mount panel.
  • Wall bracket made of stainless steel.
  • Secondary regulator from Premium Plus with tamper-evident adjustment screw and bonnet.
  • Two hose barbs and a pre-taped pipe plug are included.
  • Valve seat made of stainless steel for high corrosion resistance.
  • Inlet filter made of stainless steel.
  • supply with constant pressure and high output flow rates.
  • A pressure relief valve that releases at 55 to 65 PSI ensures safety.


Pressure0-60 PSI, for accurate keg pressure
Performance4 Pressures / 4 Kegs
Barb3/8" O.D. with shut-off
InstallationWall mount panel, pre-drilled holes
Width17 Inch
Pressure Relief Valve 55-65 PSI

Warnings / Instructions

Important information – Prop. 65 for CA residents.
Proposition 65 Warning: This product contains chemicals known to the State of California to cause cancer and/or birth defects or other reproductive harm.