4″ Column Tower – 4 Faucets – SS Polished – Air Cooled (C540)
4 tap 4″Column tower SS Polished Air cooled
Column towers are the most basic draft beer dispensers, the ones we refer to as Classic. While they come without any fancy design, these draft beer towers go by their mandate of protecting the beer lines from exposure and directing beer dispensing through faucets perfectly.
This is a 4-tap style 4” Column tower.
With SS polished finish and Air-cooled beer cooling technology, this tower meets all your requirements.
Beer TAPS:
Pour your beer with perfection with our beer taps. Draft beer is beer that’s “on tap,” as opposed to bottled. Next time you’re at a bar or a restaurant with bar, look for a row of labelled levers. The beers on tap are fresher than the bottled selection.
In Our 4 tap 4″Column tower SS Polished Air cooled, we use Brass Taps with rich grade plastic knobs.
Air- Cooled Technology:
Air-cooled technology is best for beer dispensing in short runs. This system cannot maintain the required beer pouring temperature over long distances. This setup drives Cold air from the cooler to the beer tower. Also runs along-side the beer lines and keeps them cool. Air Cooled draft beer towers are commonly found on Kegerators, Home and Commercial Bars. Place the tower close to a static or forced cold air source.
- Standard US faucet and Knobs.
- Pre fitted with 3/16” ID X 5’ long NSF approved tubing
- with beer nut on one end.
- All mounting hardware and gasket.
Specifications
Material | Stainless Steel |
Finish | SS Polished |
Cooling System | Air Cooled |
Mounting System | With Screw |
Outlet | NSF Vinyl Hose |
Height | 17.48" |
Number Of Faucet | 4 |
Faucet Center | 3-7/8" |
Column Diameter | 4" |
Thread Size | 12-24 UNC |
Warnings / Instructions
- Important information – Prop. 65 for CA residents.
- Proposition 65 Warning: This product contains chemicals known to the State of California to cause cancer and/or birth defects or other reproductive harm.