2.5″ Column Beer Tower – 1 Faucet with 1/4″ Column Shank SS Polished – Air Cooled

2.5″ Column Beer Tower – 1 Faucet with 1/4″ Column Shank SS Polished – Air Cooled (C1501)

 This 2.5” Column 1 faucet Beer tower is the most basic draft beer dispenser, the ones we refer to as Classic. While they come without any fancy design, these draft beer towers go by their mandate of protecting the beer lines from exposure and directing beer dispensing through faucets perfectly. This is a  2.5” Column 1 faucet Beer tower or Column beer tower .

With a 1/4″ column shank and SS polished finish, this tower employs Air-cooled beer cooling technology.

Beer TAPS:

Pour your beer with perfection with our beer taps. Draft beer is beer that’s “on tap,” as opposed to bottled. Next time you’re at a bar or a restaurant with bar, look for a row of labelled levers. The beers on tap are fresher than the bottled selection.

In Our Column tower, we use Brass Taps with rich grade plastic knobs.

Air- Cooled Technology:

Air-cooled technology is best for beer dispensing in short runs. This system cannot maintain the required beer pouring temperature over long distances. This setup drives Cold air from the cooler to the beer tower. Also runs along-side the beer lines and keeps them cool. Air Cooled draft beer towers are commonly found on Kegerators, Home and Commercial Bars. Place the tower close to a static or forced cold air source.

• Mounts on kegerator or counter top
• Standard US Faucets & Knobs.
• All mounting hardware & gasket
• Is available with Air Cooled technology
• Ensure that every pour from your draft beer tower comes out icy cold

Specifications

Dimensions & Measurements (PDF)

Warnings / Instructions

Important information – Prop. 65 for CA residents.

Proposition 65 Warning: This product contains chemicals known to the State of California to cause cancer and/or birth defects or other reproductive harm.