WhatsApp
Secondary Regulator Panel kit with Air distributor-3 kegs (C5718)
Get fresh chilled beer with the right amount of fizz and foam head by using the right gas pressure. While lower pressure produces flat beer and higher pressure creates foamy beer. This pre-assembled Secondary Panel with Manifold will speed up the installation of secondary regulators for your draft beer system.
A Secondary Panel with Manifold with an integrated stainless steel wall bracket that functions as a trustworthy transition between a keg jumper hose and trunkline connector. And makes installation on the wall of a walk-in cooler simple.
Additional Secondary Panel In your draft beer system, safely and effectively regulate the gas flow to the 3 keg. Secondary gas regulators reduce pressure from a primary regulator or gas blender and provide this lower pressure to each individual keg. The secondary regulators’ adjustment range is 0 to 60 PSI, allowing you to quickly amount the flow of gas from the gas source to the keg. An integrated pressure relief valve that releases the gas flow if the external pressure is higher than 55 PSI.
Other Option Available:
| Sr.no | Part Number |
| 1 | C5716 |
- Gas manifold to use with 3 kegs simultaneously.
- Has a gauge and knob to adjust pressure according to the beer style
- Stainless steel inlet filter
- Pour three same or different flavours together.
- Great for bars and pubs.
- 1 pressure and 3 items.
- Pre-drilled holes in a wall mount panel.
- 8′ of clear vinyl with a 3/8″ I.D. tailpiece made of 304 stainless steel.
- 8′ of red vinyl gas hose with a 5/16″ ID.
- Wall bracket made of stainless steel.
- Secondary regulator from Premium Plus with tamper-evident adjustment screw and bonnet.
- Two hose barbs and a pre-taped pipe plug are included.
- For durability and precise machining, brass is forged and die cast.
- Valve seat made of stainless steel for high corrosion resistance.
- Inlet filter made of stainless steel.
- supply with constant pressure and high output flow rates.
- A pressure relief valve that releases at 55 to 65 PSI ensures safety.
Specifications
| Pressure | 0-60 PSI, for accurate keg pressure |
| Performance | Single Pressure / 3 Kegs |
| Barb | 3/8" O.D. ( Both Sides ) |
| Insulation | Wall mount panel, pre-drilled holes |
| Red Hose | 8' of 5/16" I.D. Red Vinyl |
| Length | 15 Inch |
| Width | 11 Inch |
| Height | 3 Inch |
Warnings / Instructions
- Important information – Prop. 65 for CA residents.
- Proposition 65 Warning: This product contains chemicals known to the State of California to cause cancer and/or birth defects or other reproductive harm.
