Part Number : C558

4″ T Tower – 8 Faucets – Brushed Stainless – Air Cooled


  • Air Cooled Technology
  • Brushed Stainless

Sign In to View Price

Available on backorder

8 Taps 4″ T Tower Brushed Stainless (C558)

4” T style tower is a space saving slender column draft beer tower with all faucets lined on the horizontal arm at appropriate distances to pour beer at the right temperature. Used to dispense multiple beer styles simultaneously.
This 8-tap draft beer tower uses air cooled beer cooling technology and comes in Brushed Stainless finish. It will be a great attraction in your bar.

 

Beer Taps:

Pour your beer with perfection with our beer taps. Draft beer is beer that’s “on tap,” as opposed to bottled. Next time you’re at a bar or a restaurant with bar, look for a row of labelled levers. The beers on tap are fresher than the bottled selection.

In Our 8 Taps 4″ T Tower Brushed Stainless , we use Brass Taps with rich grade plastic knobs.

 

Air- Cooled Technology:


Air-cooled technology is best for beer dispensing in short runs. This system cannot maintain the required beer pouring temperature over long distances. This setup drives Cold air from the cooler to the beer tower. Also runs along-side the beer lines and keeps them cool. Air Cooled draft beer towers are commonly found on Kegerators, Home and Commercial Bars. Place the tower close to a static or forced cold air source.

  • Connection (not included, order separately).
  • 3/16” tail piece, hex nut and washer.
  • Faucet spacing : 3” center to center.
  • All mounting hardware and gasket.

Specifications

MaterialStainless Steel
FinishBrushed Stainless
Number Of Faucet8
Faucet MaterialBrass
Cooling SystemAir Cooled
Mounting SystemWith Screw
OutletNSF Vinyl Hose
Height17.32"
Column Diameter4"
Dimensions & Measurements (PDF)
Mounting Guide Template (PDF)

Warnings / Instructions

Important information – Prop. 65 for CA residents.
Proposition 65 Warning: This product contains chemicals known to the State of California to cause cancer and/or birth defects or other reproductive harm.

Replacement Parts

Item #Part NumberReplacement Part
1SS Splicer 14″ x 12-C905X1 kromedispenseC905X1Stainless Steel 304 Splicer – 1/4″ Poly x 1/2″ Poly or 3/16″ Vinyl X 3/8″ VinylSign In to View PriceAdd to Cart
24'' Tower Base Washer C523.03 kromedispenseC523.034” Tower Base WasherSign In to View PriceAdd to Cart
3Tower Mounting Screw With Washer and Nut C173.04x1 kromedispenseC173.04X1Tower Mounting Screw With Washer and NutSign In to View PriceAdd to Cart
4c186- Standard Faucet Plastic Knob-Without Brass Insert KromeC186Standard Faucet Plastic Knob-Without Brass InsertSign In to View PriceAdd to Cart