Flojet Beer Pump – G56

Flojet Beer Pump G56 (C2151)

Designed for dispensing draft beer from keg, cask, or brew kettle through both long or short, vertical or horizontal line runs while maintaining the brewers
recommended applied pressure on the beer.

• Beer and gas are totally separated in the G56 beer pump, drive gas never touches the product
• Use this for Both long or short draw systems
• Change in pumping/ Air pressure does not affect the carbonation level of the beer
• NSF approved beer pump
• Operating pressure 20 psi minimum – 90 psi maximum.

Pump system to dispense beer out of kegs or flasks. Use with any beer gas or even air. Simple and easy way to pour beer in pubs and breweries. High operational efficiency.

Specifications – Flojet G56

C2151 beer pump installation G56 flojet

• Warning:
  – If used with Carbon di-oxide gas or nitrogen gas, be sure the pump installed area – cold room/keg space is well ventilated
  –  use the pump only with specified products
  – Do not pump flammable liquids or use where flammable vapors are present

• Cost-effective: no need for mixed gases or gas blenders
• Air compression can be used to pressurize the beer pumps
• Capable of traversing up to 800 feet (244m) horizontally through a single line
• The pump can be used to aid in beer line cleaning through wall mounted cleaning sockets
• Feeds up to 3 faucets through a single line

Specifications

Warnings / Instructions

Important information – Prop. 65 for CA residents.

Proposition 65 Warning: This product contains chemicals known to the State of California to cause cancer and/or birth defects or other reproductive harm.