Part Number : C5724

Secondary Regulator Panel Kit- 4 Keg

Secondary Regulator Panel Kit- 4 Keg

Sign In to View Price

Available on backorder

Secondary Regulator Panel Kit 4 Keg (C5724)

Set perfect gas pressure dispensing out crisp fresh beer. Higher pressure gives out a foamy one while lower leads to flat beer and we are not fans of either. This regulator panel with air distributor caters to the Secondary pressure regulating network of beer gas regulators.
Secondary Regulator Panel In your draft beer system, safely and effectively regulate the gas flow to the four kegs.  Secondary gas regulators reduce pressure from a primary regulator or gas blender and provide this lower pressure to each individual keg. The secondary regulators’ adjustment range is 0 to 60 PSI, allowing you to quickly amount the flow of gas from the gas source to the keg.  There is an integrated pressure relief valve that releases the gas flow if the external pressure is higher than 55 PSI.
The output pressure at each outlet can be varied. For your convenience, it has a specific knob and gauge for each outlet. This allows simultaneous dispensing from two kegs using just one gas cylinder.

Other Option Available : Part Number
1 C5721
2 C5722
  • Gas manifold kit to use with 4 kegs simultaneously.
  • Stainless steel inlet filter
  • Pour three same or different flavors together.
  • Great for bars and pubs
  • 4 pressures and 4 outputs.
  • Pre-drilled holes in a wall mount panel.
  • 8′ of clear vinyl with a 3/8″ I.D. tailpiece made of 304 stainless steel.
  • 8′ of red vinyl gas hose with a 5/16″ ID.
  • Wall bracket made of stainless steel.
  • Secondary regulator from Premium Plus with tamper-evident adjustment screw and bonnet.
  • Gas from the main gas source is regulated by the secondary regulator before it enters a single keg.
  • Two hose barbs and a pre-taped pipe plug are included.
  • For durability and precise machining, brass is forged and die cast.
  • Valve seat made of stainless steel for high corrosion resistance.
  • Inlet filter made of stainless steel.
  • supply with constant pressure and high output flow rates.
  • A pressure relief valve that releases at 55 to 65 PSI ensures safety.


Pressure0-60 PSI, for accurate keg pressure
Performance4 Pressures / 4 Kegs
Barb3/8" O.D. with shut-off
InsulationWall mount panel, pre-drilled holes
Red Hose8' of 5/16" I.D. Red Vinyl
InstallationWall mount panel, pre-drilled holes
Length20 Inch
Width11 Inch
Height10 Inch

Warnings / Instructions

Important information – Prop. 65 for CA residents.
Proposition 65 Warning: This product contains chemicals known to the State of California to cause cancer and/or birth defects or other reproductive harm.