Part Number : N/A

7.32″ x 6.85″ x 4.54″ Counter Top Frothing Pitcher Rinser/Glass Rinser SS 304


  • Stainless Steel Contact With Beer

Keep your pitchers/glasses/cocktail shakers clean and cool by locating the rinser next to your Espresso Machine or beer tower and in between gives a blast of pressurized water preparation for next drink preparation.You’ll save water and time with a pitcher rinser on your espresso bar.

Sign In to View Price

7.32″ x 6.85″ x 4.54″ Counter Top Frothing Pitcher Rinser/Glass Rinser SS 304 (C334)

Use Countertop rinser with an already set-up counter. Simply connect water and drain line pipes without cutting out part of the countertop.

Recommended rinsing after every use. This removes milk deposits and brings down the pitcher temperature which would be hot from steaming. Press down the rinser disc with inverted milk jar. The activated spray-jets rinses it thoroughly.
Handy sanitizing solution. Cooled down steaming pitcher works best to get foamy and frothy milk for the next batch of lattes and cappuccinos.

All Krome rinser are NSF certified.

Please Note: It is recommended that you use a Pressure Limiting Valve (PLV) when connecting to a mains water line.

Includes: C029 – 1/2″ BSP Connector With 3/8″OD X 5 Feet Hose

 

  • Rinse milk steaming jar after every use. Keeps it hygienic and ready for next use
  • Counter-top model. Simply make water and drain connections and place on the counter.
  • Stainless steel rinser disk with high-pressure jet sprayer
  • For best results, use cool water.
  • Flow rate: 1.9 GPM @60PSI

Specifications

MaterialStainless Steel 304
FinishBrushed
Length7.32"
Width6.85"
Height4.54"
Suitable forAny espresso
ShapeSquare
Standard Packing10
ApprovalsNSF Certified (Rinser Only)
Dimensions & Measurements (PDF)
Due to slight variations in manufacturing design and the varying requirements of bench materials, it is strongly recommended to have the physical Pitcher Rinser on hand prior to cutting into bench top surfaces. We take no responsibility for installation cut out errors and provides the sizes and dimensions as a layout guide only.
Cut Sheet (PDF)
Dimensions & Measurements (PDF)
Line Drawing
Technical Sheet (PDF)
Submittal
Exploded View (PDF)
Exploded View

Warnings / Instructions

Important information – Prop. 65 for CA residents.
Proposition 65 Warning: This product contains chemicals known to the State of California to cause cancer and/or birth defects or other reproductive harm.

Replacement Parts

Item #Part NumberReplacement Part
1Replacement Plastic Rinser Disk C334.04 kromedispenseC334.04Replacement Plastic Rinser DiskSign In to View PriceAdd to Cart
2Pitcher Rinser Spray Assembly C334.13 KROMEDISPENSEC334.13Pitcher Rinser Spray Assembly-NSF CertifiedSign In to View PriceAdd to Cart
3Drain Assembly C060.04 kromedispenseC060.04Drain AssemblySign In to View PriceAdd to Cart
4C072 Plastic Quick Connect 3/8″JG x 5/8″ BSP Female Adapter KromedispenseC072Plastic Quick Connect 3/8″JG x 5/8″ BSP Female AdapterSign In to View PriceAdd to Cart
51/2" BSP Connector With 3/8" OD X 5 Feet Hose - PP Pipe Assembly C029 kromedispenseC0291/2″ BSP Connector With 3/8″ OD X 5 Feet Hose – PP Pipe AssemblySign In to View PriceAdd to Cart
6C333.04 - Small Hush Gasket - KromeC334.077.32″ X 6.85″ Hush Gasket – SmallSign In to View PriceAdd to Cart

Installation Instructions

Rinser Water Inlet Installation Instructions

  • Always check with local plumbing codes before Installation
  • For Use with Regular or cold water supply only, Hot water is not recommended to use with rinser
  • Install in-line water regulator set at 15 PSI from the public water supply, no more than 15 Psi
  • Install an in-line one-way check valve on water supply this will prevent pressure drop which can cause leakage
  • Install in-line shut-off for the rinser system from the water supply, this must be turned off if not in use for extended periods such as off days or night time!
  • Install a shut-off for the water supply if the line is not hard plumbed into the system.